The PMC50 Floor Box is the ideal solution for workstations when installation in concrete floors is required.
The concrete floor box accepts a wide variety of power, data and audio/video connectors such as decorative style inserts, keystone style jacks and our exclusive Fit-IN system, which permits to install up to six duplex receptacles (15 Amp) in only one box.
Two cable guards protect cables and reduce risk of damage to all incoming and outgoing cables. A recessed space (7/16 In.) allows to insert a piece of floor covering material providing a smooth, seamless look.
The flanged frame and lid can be adjusted and leveled after concrete pour. The lid can be rotated with no tools for easy outgoing cables orientation.
PMC50 Concrete floor box
PMC50 floor boxes are suitable for installation in concrete floors interior dry locations where the accumulation of scrub water is unlikely to occur.
Item
Floor Box
10 3/16" (259mm)
8" (203mm)
3 5/16" (84mm)
Cover
11 1/8" (283mm)
8 7/8" (225mm)
1/8" (3mm)
Width
Length
Height
Box dimensions
- 16 Concentric Knockout's - 1/2'' and 3/4" conduits accessibility at all four sides.
- Manufactured in compliance with UL514A Standard
Box features
- Galvanized steel housing - 16 GA Provides added strength and reliability.
- "Old work" or "New work" versions with or without levelling feet.
- Low profile box - Easy installation in low profile floors (3 5/16'' depth).
Support documents
PMC50 Installation guide
PMC50 Concrete Floor Box
Floor box covers
- Contemporary look
- Adjust to the final floor level
- Brushed finish / Powder coated
- Stainless steel / Steel / Brass
- Cable guard
- Handle
- ADA Compliance
Faceplates
Faceplates are available in three different dimensions identified as (1/4) “One quarter”, (3/4) “Three quarters” and (4/4) “Four quarters”.
Each side of the box is filled with (4/4) “Four quarters”.
Select the appropriated faceplates to complete 4/4 “Four quarters”. (ie: Combine One (1/4) + One (3/4)= 4/4 fills side A).
NOTE: Four 1/4 type faceplates cannot be installed in the same side.
MPN: 13603
Blank - 1/4 Type faceplate -Combine with 3/4 faceplate to fill one side of the box.
MPN: 13623
Two Keystone ports - 1/4 Type faceplate - Combine with 3/4 faceplate to fill one side of the box.
MPN: 13612
Decorator style - 3/4 Type faceplate - Combine with 1/4 faceplate to fill one side of the box.
MPN: 13601
Standard Duplex - 3/4 Type faceplate - Combine with 1/4 faceplates to fill one side of the box.
MPN: 13620
Twist lock - 3/4 Type faceplate - Combine with 1/4 faceplates to fill one side of the box.
MPN: 13600
Blank - 3/4 Type faceplate - Combine only with 1/4 faceplate to fill one side of the box.
MPN: 13606
Four XLRs Cut Outs - 4/4 Type faceplate - Completely Fills one side of the box.
MPN: 44633
Duplex + 4 Keystones - 4/4 Type faceplate -Completely Fills one side of the box. (Includes barrier).
MPN: 44607
Fit-IN System - 4/4 Type faceplate - Fills one side of the box. See available modules.
For VGA, data jacks and most audio-video jacks please use our part #23612 and DECF6W Visit Connectivity Options for details.
FIT-IN System
For use with the Fit-In Yoke part #44607 (please view faceplates section).
The Fit-IN modular system allows the user to place up to 12 modular inserts for power, HDMI, RJ45, RCA – S-Video- 3.5 mm Mic. – USB – and most keystone style jacks inside the PMC50 floor box. Now, you can place all services in just one box.
FBS64
Single port Standard Keystone
FBS65
Double Port Standard Keystone
FBS66
Blank
FBS67
Double port Panduit (Mini-com)
FBS61
15AMP - 125V
FBS62
Double port Systimax (M Series)
FBS63
Single port Systimax (M Series)
Ordering information
Sold as a kit (Includes box and cover). Faceplates and devices sold separately.
For complete part numbers and details please download the following chart.
Kit
Box+Cover
PMC50B
PMC50A
PMC50G
Cover
Color
Black
Almond
Grey
Cover
Surface
Recessed
Recessed
Recessed
Cover
Edge
Beveled
Beveled
Beveled
Floor Box
(Only)
PMC50
PMC50
PMC50
Cover
(Only)
HL4750B
HL4750A
HL4750G